Alcatel-Lucent CellPipe 7130 Manual page 57

Network
............................................................................................................................................................................................................................................................
Fields
VLAN
CoS Remarking
IP Address
NetMask
Next
Back
After the second connection is set, you are returned to the WAN PTM Connections
window; see
Overview table.
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
Description
Select Untagged if VLAN tagging is not to be used for this WAN
connection.
Select Always use ID if VLAN tagging is to be used and enter the
VLAN ID number (between 0 and 4094).
Enter the CoS remarking number.
Enter the IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Click to proceed to the next step.
Click to return to the previous page.
Figure 6-11. The two new connections, default and bridged, appear in the
WAN PTM Connections
6 - 1 9