Memory Save And Terminal Setting; Storable Functions In Memory; Input Terminal - Panasonic HL-C2 Series User Manual

Chapter 4 Explanation of Functions

4-4-3 Memory Save and Terminal Setting

The setting contents for each function can be stored in 16 different patterns
in the controller memory.
This function stores the measurement or judgment conditions for each
measurement object respectively, so without re-inputting of various function
setting, the condition change can be performed only by changing the memory No.
"Memory change" can be executed by "Compact Programmable display" or
"External Terminal Input (M0 to M3)".

■ Storable Functions in Memory

The function settings which can be stored in the memory are divided into two types.
One is the function which can be stored in each specified memory No., and another
is the function which can be stored as common setting value among all memories.
For the detail of the above two type storable functions, refer to
4
List & Initial Values".
■ Memory Change Procedure by External Input Terminal
1
2
3
4
5
With the above five steps, the memory No. change can be performed by the
external input terminal.
Select Memory No. to be stored.
For setting by compact programmable display, refer to
Setting" – "Memory Change".
After selecting memory No., input the setting value for each function.
For memory changeable functions, refer to
Values".
Set "Terminal" at "Priority Setting of Memory Change".
For "Priority Setting of Memory Change", refer to
– "Priority Setting of Memory Change".
Execute all memory save.
If not doing so, "Terminal" cannot be set.
For "Save" function, refer to
Set the memory No. to be used to the external terminal input (M0 - M3).
*The setting can be input by manually on the compact programmable display,
or by the command of RS-232C and USB communication control, or
Intelligent Monitor AiM.
"4-3 Function List & Initial
"4-3-4 System Setting" – "Save".
4-88
"4-3 Function
"4-3-4 System
"4-3-4 System Setting"