Panasonic HL-C2 Series User Manual page 112

Chapter 4 Explanation of Functions
· Make sure to perform the actual measurement and confirm the results before
setting the cutoff frequency because of the different conditions.
● How to use
1
2
4
Setting of the average times:
3
Setting of Low-pass/High-pass filter:
3
Display the "Filter Operation" screen.
Selection screen of OUT1
Touch the "Filter Selection" key to select
the desired filter.
The display changes as below by touching the key.
Moving Average
Low-pass filter
Touch the key of "Average Times"
to select the desired average times.
The display changes as below by touching the
key. Touching the
a counterclockwise direction.
512 1024
256
128
64
32 16
Touch the key of "Cutoff
Frequency" to select the desired cutoff
frequency.
The display changes as below by touching the
key. Touching the
a counterclockwise direction.
100Hz 200Hz
40Hz 20Hz
High-pass filter
key changes in
2048 4096
8 4
key changes in
400Hz 1000Hz
10Hz 4Hz
4-38
Selection screen of OUT2
8192 16384
32768
65536
1
2
2000Hz
2Hz 1Hz