Panasonic HL-C2 Series User Manual page 100

Chapter 4 Explanation of Functions
● How to use
1
2
3
4
4
Touch the
Ex
select the measurement surface referring the below figure.
Transparent/glass
Clearance (space)
Transparent/glass
Clearance (space)
Transparent/glass
Display the "Output Selection" screen.
Selection screen of OUT1
Touch the key to select your setting
of "Output Selection".
"■ Output Selection"
Touch the key to change the screen
for selecting the measurement surface of
"Transparent Object".
*The setting of the transparent object can be
performed only when "A", "-A", "B", or "-B" of
[Transparent Object] is selected at the "Output
Selection".
key to change the setting.
The setting is changed each time the key is touched.
When "Near setting" is set at the "Measurement Surface Reference",
Near
Far
1st
1st-2nd
2nd
1st-3rd
3rd
2nd-4th
1st-4th
4th
1st-Max 2nd-Max
Max
4-26
Selection screen of OUT2
2nd-3rd
3rd-4th
4th-Max
3rd-Max