Panasonic HL-C235CE-W Series Instruction Manual

Ultra High-Speed, High-Accuracy Laser Displacement Sensor
Sensor Head
HL-C235CE-W□
Thank you very much for purchasing Panasonic products. Read this Instruction Man-
ual carefully and thoroughly for the correct and optimum use of this product. Kindly
keep this manual in a convenient place for quick reference.
● This product is intended to detect the objects and does not have the control func-
tion to ensure safety such as accident prevention.
Do not use the product as a sensing device to protect human body.
● B e careful not to directly watch or touch the direct laser beam or reflected laser
beam.
● The product was developed and manufactured for industrial use.
BEFORE USE
● Before using the product, check the sensor head model and contents of packing.
● Sensor head model
Check the model name of product at the top of sensor head.
● Packing
Check that all of the following components are included in the
package.
• 1 sensor head unit
• 1 Instruction manual
• Laser warning labels
[JIS/IEC: 1 set, GB: 1 set (E type only)]
● T his product satisfies the adaption of CE product by using in combination with
controller and programmable display, which are subjected to CE. Please confirm
that there is CE mark on connecting controller's label.
● Contact for CE
Panasonic Marketing Europe GmbH Panasonic Testing Center
Winsbergring 15, 22525 Hamburg,Germany
1 DESCRIPTION
● HL-C235BE-W□, HL-C235CE-W□ displacement sensor head achieves ultra high-
speed and high-accurate measurement using linear image sensor as light receiv-
ing element to be used on equipment that require high-speed operation with high-
accuracy.
2 CAUTIONS ON HANDLING LASER LIGHT
● For the purpose of preventing any injury which may occur to the user by the use
of the laser product in advance, the following standards have been established by
the IEC Standards, JIS Standards, GB Standards and FDA Standards.
IEC : IEC 60825-1
-2007
JIS : JIS C 6802
-2011
GB : GB 7247.1
-2012
FDA : PART 1040.10
These standards classifies laser products according to the level of hazard and
provide the safety measures for respective classes.
● Laser hazardous class
Classification according to IEC 60825-1
Class Model
HL-C235CE-W
Class 3R Direct intrabeam viewing is hazardous, but risk is lower than for 3B.
HL-C235CE-WMK
● WARNING label
<HL-C235CE-W□>
In Japanese / English / Korean
In Chinese
(E type only)
INSTRUCTION MANUAL
MJE-HLC235EW(02) No.0048-80V
WARNING
(JIS C 6802 )
-2007 -2005
Description of hazardous evaluation
● F DA certification label
<Label position>
● Install the product so the laser beam comes higher or lower than eye level in order
not to watch the beam directly during operation. Laser safety distance (Nominal
Ocular Hazard Distance: NOHD) is approx. 1.4m. The laser beam must be termi-
nated at the end of its path by a diffuse reflector or an absorber.
● Please contact our company if the system breaks down. It is not equipped with a
function that stops laser radiation automatically during disassembling the sensor
head. The users therefore may be exposed to laser beam in disassembling the
sensor head.
● W hen this product is used in China, affix the Chinese warning label (accessory)
on the label in the product.
● Do not use the system in the manner other than specified in this Instruction Manual.
3 SPECIFICATIONS
Model No. HL-C235CE-W
Meas. method (Note 2)
Measurement center distance
Measurement range (Note 3)
Red semiconductor laser Class 3R (JIS/IEC/GB), Class IIIa (FDA) (Note 4)
Beam source
Max output: 5mW, Emission Peak wavelength: 658nm
Beam diameter (Note 5) Approx. ø400μm
Beam receiving element
Resolution 8μm / average times: 256, 2μm /average times: 4,096
Linearity ±0.04%F.S. (-200 to 0mm), ±0.08%F.S. (0 to +200mm) (F.S. = ±200mm)
Temperature characteristics
Laser emission
Meas. range Yellow LED: Near measurement center:ON, within measurement range:Blink, beyond the range:OFF
Protective structure
Pollution degree
Insulation resistance 20M ohms or more by 500V DC megger (between all the terminals and enclosure.)
Commercial Frequency AC 500V for 1min. (between all the terminals and enclosure.)
Impulse ±1,000V 1.2/50μs (between all the terminals and enclosure.)
Endurance: 10 to 55Hz (cycle: 1minute), Resistant amplitude of vibration: 1.5mm, in
Vibration resistance
X, Y, and Z directions for 2 hours
Shock resistance
Ambient illuminance (Note 6) 3,000ℓx or less (illuinance at beam receiving surface using incandescent lamp)
Ambient temperature 0 to +45°C (No dew condensation or icing allowed), At storage: -20 to +70°C
Ambient humidity
Ambient Height
Material Main unit case / cover faluminum: Die-cast, Front cover: Glass
Cable length
Cable extension Extendible to 30m long maximum using the optional extension cable.
Weight
Applicable standards
Notes: 1) Measuring conditions are as follows unless otherwise specified; connection with controller, power voltage:
24V DC, ambient temperature: 20°C, sampling cycle: 40μs, average times:256, at measurement center dis-
tance, object substance: white ceramic,, and digital measurement value.
2) Use the external ND filter (optional) in case the amount of reflected beam is too large on Specular Reflection
installation.
3) The measurement range is limites between -70 and +200mm (in case the sampling cycle is 20μs), or be-
tween +100 and +200mm (in case the sampling cycle is 10μs).
4) This is based on the FDA Standard, according to Laser Notice No. 50 of the FDA Standard.
5) The figure shows the value at measurement center distance. It is determined by 1/e
of center beam intensity. Due to leak light outside the specified area, the reflectance around the detecting
point may be higher than at the point and this may affect the measurement value.
6) The variation in ambient illuminance is ±0.08%F.S. or less.
4 EXPORT REGULATIONS BY JAPANESE GOVERNMENT
● P lease follow the export control regulations required.
HL-C235CE-W(MK) (E type) are not subject to export control regulations under
the condition that they are used combined with the non-pertinent controller to ex-
port control specified by Foreign Exchange and Foreign Trade Law.
When they are combined with the pertinent controller to export control, they are
subject to the Law. In this case export admission by Japanese government is re-
quired before the product is to be exported or brought out of the country.
HL-C235CE-WMK
Diffuse reflection
350mm 350mm
±200mm ±200mm
Approx. 400 × 6,500μm
Linear image sensor
0.01%F.S./°C
Green LED: Lights up during laser emission.
IP67 (except connector)
2
196m/ s 2 in X, Y, and Z directions for 3 times
35 to 85%RH At storage:35 to 85%RH
2,000m or less
0.5m
Approx. 300g including cable weight
Conformed to EMC Directive
2 (approximately 13.5%)