Console Setting - Panasonic HL-C2 Series User Manual

Chapter 4 Explanation of Functions

■ Console Setting

This function sets "Panel Lock" and "Start-up Screen" of compact programmable
display.
Panel Lock
"Panel Lock" is used for prohibiting the setting change on the compact programmable
display to prevent any setting error occurrence due to unintentional operation on the
compact programmable display. When this function is set to "ON", any operations
except for screen display change and setting off of "Panel Lock" are prohibited.
* Save function, however, can be executed and the "Panel Lock" is valid at the
next system start-up by saving the setting.
Start-up Screen
"Start-up Screen" is used for selecting the screen which is displayed after the
wake-up screen of compact programmable display.
Select from 16 screens shown in the next page.
By selecting the screen that are often used or used for setting confirmation as a
4
start-up screen, the setting steps can be shortened.
Make sure to save the setting to fix the selected start-up screen.
● How to use
1
Panel Lock setting
2
Start-up Screen setting
2
Display the "Console Setting" screen.
Touch the Panel Lock key to select
.
OFF
The key display is changed between
OFF each time the key is touched.
Touch the key of "Start-up" to select
the screen which is displayed after the wake-up
screen of compact programmable display.
The display is changed as below by touching the
key. Also, the display is changed in
counterclockwise by touching the
OUT1 Display OUT1 Operate
Meas Val Menu
System Menu
Common Menu OUT2 Menu
or
ON
ON and
key.
OUT2 Display OUT2 Operate
OUT1 Menu Head B Menu
4-72
OUT1&2 Display Waveform(A)
Waveform(B)
Top
Head A Menu Setting