Panasonic HL-C2 Series User Manual page 53

I/O terminal block
* Turn off the terminal in case short circuit lasts for more than one
second.
Refer to
Do not connect anything to the reserved terminals; they are connected to the
internal circuit.
Terminal
NPN PNP
ZS2 Zero set input (for OUT2) ON during short circuit
TM2 Timing input (for OUT2) ON during short circuit
RS2 Reset input (for OUT2) ON during short circuit
(-) Common (-)
AL2
Alarm output (for OUT2)
ST2 Strobe output (for OUT2)
HI2 Judgment HI output (for OUT2)
GO2
Judgment GO output (for OUT2)
LO2 Judgment LO output (for OUT2)
･
Reserved
(-) (+)
Common (-)/Common (+)
M0
M1
Memory change (16 ways)
M2
M3
(-) Common (-)
"1-4 Connection" for the connection method of terminal block.
2-3
Chapter 2 I/O Terminal Block
Function
*
2