Warning Information; Conformity Declaration - Truma Mover S User Manual

The remote hand set switches itself off after about 2 minutes
if no buttons are pressed.
Check whether both drive motors are stationary. Press the
"forwards" button with the remote hand set switched on –
both drive motors must now move in the forward direction.
Engage the drive rollers against the tyres by using the remote
hand set.
Please ensure that there are no obstructions beneath the cara-
van, then release the handbrake. Now check all functionality
as per the operating instructions.
Apply caravan handbrake. Disengage the drive rollers and
move slide switch on remote hand set to the "Off" £ position
to switch the remote hand set and the Mover off. Re-check
distance between drive rollers and tyres. Adjust if necessary.
The distance between the disengaged drive rollers and
the tyres is 20 mm.

Warning information

The yellow sticker with the warning information, which is
enclosed with the appliance, must be affixed by the installer
or vehicle owner to a place in the vehicle where it is clearly
visible to all users (e.g. on the wardrobe door)! Ask Truma to
send you a sticker, if necessary.
Technical data Mover SE R / TE R
Operational voltage
12 V DC
Current consumption
average approx. 35 A maximum 150 A
Stand by consumption
< 15 mA
Remote hand set frequency
Class 1, 868 MHz
Speed
approx. 17 cm per second (depending on weight and incline)
Weight
approx. 33 kg
Fuse engagement motors
Blade fuse 20 A
Fuse in positive supply cable
150 A
Area of operation Mover SE R
Single axle caravans with a total weight up to 2000 kg
Area of operation Mover TE R
Dual axle caravans with a total weight up to 2250 kg
Right to effect technical modifications reserved!
22

Conformity Declaration

1. Manufacturer master data
Name: Truma Gerätetechnik GmbH & Co. KG
Address: Wernher-von-Braun-Str. 12, D-85640 Putzbrunn
2. Equipment identification
Model / Version:
Mover S, Mover SE, Mover TE, Mover H SE, Mover H TE,
Mover SR, Mover SE R, Mover TE R manoeuvring aid
3. Complies with the requirements of the following
EC directives
3.1 R&TTE directive (1999/5/EC)
3.2 Low voltage directive (73/23/EEC)
3.3 EMC directive (89/336/EEC, 2004/108/EC)
3.4 Interference suppression in motor vehicles
(72/245/EEC, 2006/28/EC)
3.5 Machinery Directive 2006/42/EC
and bears the type approval number e1 03 4473 and the CE
symbol.
Mover S:
class 1, optional frequency 434 MHz or 868 MHz.
Mover SE / Mover TE / Mover H SE / Mover H TE / Mover SR /
Mover SE R / Mover TE R:
Class 1, frequency 868 MHz.
Countries:
AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU,
IE, IS, IT, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.
4. Basis of proof of conformity
EN300220-2:2006, EN300220-1:2006 (R&TTE art. 3.2),
EN301489-1:2005, EN301489-3:2002 (EMC art. 3.1b),
EN61000-4-2:2001, EN61000-4-3:2006, EN61000-4-6:2001,
EN55022:2003 (Class B), ISO 7637-2:2004,
EN60950:2001, 2006/28/EC, 2006/42/EC
5. Monitoring body
Federal Office for Motor Traffic
6. Information concerning position of undersigned
Signature: Dr. Schmoll
Executive Manager, Technology Putzbrunn, 15.12.2008