Programming Global Meter Settings - GE Transport PT878 Abridged Manual

Programming Global
Meter Settings
Operation
Using the Meter Menu, you can program global settings for the meter
that suit your individual preferences. To enter the Meter Menu:
Note: As an aid in following the programming instructions in this
manual, refer to Appendix A, Menu Maps.
1. Press the
[MENU] key at the lower right of the PT878 keypad. The
Menu Bar replaces the Status Bar at the top of the screen.
2. Scroll across until the Meter Menu tab is highlighted, and press
[ENTER] . A window similar to Figure 3-11 below opens.
Site Program
Velocity, ft/s
Units
0.00
Delta-T, ns
0.10
E0: No Errors
Figure 3-11: The Meter Menu Window
Use the [ ] or [ ] arrow keys to highlight the desired menu option
and press [ENTER] to open the option window. Proceed to the
appropriate section for programming instructions.
Note: The Language, User Tables, and Snapshot options are not
discussed in this abridged manual. Refer to your full PT878
manual (910-219) information on these options.
Meter Logging Service
Signal, dB
Units
Battery
32
Date/Time
Locale
Contrast
Backlight
Language
Volume, l/s
Communication
Totals
User Tables
√
Snapshot
August 2008
0.0
3-13