Chapter 3: Operation; Configuring The Display Options - GE Transport PT878 Abridged Manual

Configuring The Display
Options
Operation
The PT878 allows you to view 1 to 4 different measurement
parameters simultaneously in either numeric or graphical format. To
configure the display, press
a cursor appears next to the parameter closest to the upper left corner
(see Figure 3-1 below). Use the
displayed measurements until you reach the desired parameter. Then,
press [ENTER] to open the Display Menu for that parameter.
Proceed to the appropriate section for detailed instructions.
ABC.SIT
4Velocity, ft/s
Format View Measurement
0.00
Delta-T, ns
0.10
E0: No Errors
Figure 3-1: Display After Pressing [SEL]
from the Operate Mode window and
[SEL]
key to scroll through the
[SEL]
2000/11/30 09:53 AM
Signal, dB
32
Volume, l/s
August 2008
0.0
3-1