Analyzer Feature Tutorial; Multi-Channel Measurement Tutorial; To Setup Measurement; To Make Response Calibration - Agilent Technologies E5100A User Manual

Analyzer Feature Tutorial

Multi-channel Measurement Tutorial

To setup measurement

Note

To make response calibration

The analyzer has up to four channels. Each channel can measure
independently.
1. Press
4 5
Meas/Format
2. Con rm that the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH1] at the bottom of softkey
is displayed. When the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH2] to change the active channel to channel 1.
3. Press
4 5
Meas/Format
4. Press
NNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LOGMAG & PHASE .
FORMAT
5. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH1] to change to
6. Press
4 5
Meas/Format
7. Press
NNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LOGMAG & PHASE .
FORMAT
8. Press
4 5 4 5 4 5
Center 7 0
9. Press
4 5 4 5 4 5 4
Span 5 0
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
When the NUM of CH is set to 3 or 4, the format which has dual trace
on one channel, such as
1. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH2] to change to
2. Verify that the measurement traces of channel 1 is displayed.
3. Connect a BNC cable between RF OUT2 and input R.
4. Connect a thru between RF OUT1 and input A.
5. Press NNNNNNNNNNNNNNNNNNNNNNNNNN
RESPONSE
4 5
Cal
6. The
NNNNNNNNNNNNNN
THRU softkey label is underlined when the measurement is
completed.
7. Press NNNNNNNNNNNNNNNNN
DONE: .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNN
2 .
NUM of CH
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH2] is displayed, press
NNNNNNNNNNNNNN NNNNNNNNNNN
A/R .
MEAS
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNN NNNNNNNNNNN
A/R .
MEAS
NNNNNNNNNNN
x M .
NNNNNNNNNNN
x k .
5
0
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LOG MAG & PHASE , is not available.
NNNNNNNNNNNNNN
THRU .
ACTIVE CH [CH2] .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
ACTIVE CH [CH1] .
Analyzer Feature T utorial
5
5-1