Installation And Set Up Guide; Incoming Inspection - Agilent Technologies E5100A User Manual

Installation and Set Up Guide

Incoming Inspection

Warning
This chapter provides the information necessary for performing an
incoming inspection and setting up E5100A/B.
The main topics in this chapter are:
Incoming Inspection
Power Cable
Power requirements
Ventilation Requirements
Instruction for Cleaning
Rack Mounting Installation
To avoid hazardous electrical shock, do not turn on the E5100A/B
when there are signs of shipping damage to any portion of the
outer enclosure (for example, covers, panel, or display)
Inspect the shipping container for damage. If the shipping container
or cushioning material is damaged, it should be kept until the
contents of the shipment have been checked for completeness and
the E5100A/B has been checked mechanically and electrically. The
contents of the shipment should be as listed in Table 3-1. If the
contents are incomplete, if there is mechanical damage or defect, or if
the analyzer does not pass the power-on selftests, notify the nearest
Agilent Technologies oce. If the shipping container is damaged,
or the cushioning material shows signs of unusual stress, notify the
carrier as well as the Agilent Technologies oce. Keep the shipping
materials for the carrier's inspection.
Installation and Set Up Guide
3
3-1