Manual Changes; Introduction - Agilent Technologies E5100A User Manual

Manual Changes

Introduction

Manual Changes
This appendix contains the information required to adapt this manual
to earlier versions or con gurations of the E5100A/B than the current
printing date of this manual. The information in this manual applies
directly to the E5100A/B serial number pre x listed on the title page
of this manual.
To adapt this manual to your E5100A/B, see Table A-1 and Table A-2,
and make all the manual changes listed opposite your instrument's
serial number and rmware version.
Instruments manufactured after the printing of this manual may be
di erent from those documented in this manual. Later instrument
versions will be documented in a manual changes supplement that
will accompany the manual shipped with that instrument. If your
instrument's serial number is not listed on the title page of this
manual or in Table A-1, it may be documented in a yellow MANUAL
CHANGES supplement.
In additions to change information, the supplement may contain
information for correcting errors (Errata) in the manual. To keep
this manual as current and accurate as possible, Agilent Technologies
recommends that you periodically request the latest MANUAL
CHANGES supplement.
For information concerning serial number pre xes not listed on the
title page or in the MANUAL CHANGE supplement, contact the
nearest Agilent Technologies oce.
To con rm the program version, LOAD and RUN the program or con rm
the beginning part of the program by typing EDIT .
Table A-1. Manual Changes by Serial Number
Serial Pre x or Number
JP1KC
JP2KC,JP3KC,JP4KC,JP5KC
Table A-2. Manual Changes by Firmware Version
Version
REV.1.XX
REV.2.xx, 3.xx
Make Manual Changes
none
none
Make Manual Changes
none
none
Manual Changes
A
A-1