Maintaining An Sds; Operating Conditions; Handling The Sds; Moving The Sds - Quatech Device Server User Manual

Quatech SDS User's Manual

Maintaining an SDS

Operating conditions

Handling the SDS

Moving the SDS

Cleaning the SDS

Servicing the SDS

October 2006
The SDS series is designed to work in environments that are free
from dust, dirt, and moisture. You can operate an SDS at
temperatures between 0° to 70°C. Do not leave an SDS where
moisture can condense on it.
The following information can help you to use the SDS in a reliable,
trouble-free manner.
Make sure the SDS is off before you connect or remove the
Ethernet cable.
Make sure that all serial devices are connected correctly.
Protect the SDS from excessively dirty or damp conditions.
Do not drop, strike, or handle the SDS roughly. Handle it like any
other piece of sensitive electronic equipment.
Follow these steps if you need to move your SDS or prepare it for
shipment.
Disconnect the power cable.
Disconnect all other cables.
If you are shipping the SDS, use the original packing material
and container. If you no longer have the original packaging, use a
sturdy carton and sufficient packing material to protect the SDS
during shipment.
Clean the outside of the SDS as needed with a slightly moist soft
cloth. Do not use solvents or abrasive cleaners.
There are no user-serviceable parts in the SDS. Contact Quatech for
repair. Be sure to obtain an RMA number from Quatech technical
support before returning your SDS for service.
Support Request Form:
940-0183-154
Troubleshooting and Maintaining an SDS
http://www.quatech.com/support/support.php
Page 83