Getting Started; Unpacking Your Sds - Quatech Device Server User Manual

Quatech SDS User's Manual

Getting started

Unpacking your SDS

Step Procedure
Step 1 Remove the SDS from the box.
Step 2 Remove all packing material from the SDS.
Step 3 Check the contents of the package to make
sure you have received everything listed
below:
SDS
Power cable
Power source
Loopback connector(s)
CD-ROM containing the SDS device
drivers and configuration software
Quick Start Guide
Step 4 Check the SDS and accessories for shipping
damage.
October 2006
Follow these steps to unpack your SDS.
940-0183-154
Description
Save the packaging in case you ever need
to store the unit or return it to Quatech
for service.
The complete SDS package ships in a
single box.
Pay particular attention to the SDS' case
and port connectors. If anything is
missing or damaged, contact your
Quatech sales representative.
Introduction
Page 7