Figure 21 - Tcp/Ip Network Configuration Parameters Screen; Figure 22 - Install The Device Drivers Screen - Quatech Device Server User Manual

Quatech device server user's manual

Hide thumbs

Table Of Contents

Table of Contents

Installing the device drivers

Figure 22 shows the TCP/IP

network configuration parameters

including the following:

Address type

IP Address

Subnet mask

Default gateway

Caution!

If your address

type is Dynamic, the Wizard

asks you to confirm that

you want the DHCP server

to assign the IP address for

your SDS. Be aware that if

your DHCP server is not

configured to assign the

same address to the SDS

every time, communication

with the SDS may fail should

the SDS ever be reset.

Step

Procedure

Step 26

Press the Next button to continue.

Figure 23 informs you that the

Wizard is ready to install the

device driver(s) and create the

serial port(s).

Step

Procedure

Step 27

Press the Next button to continue.

Note: If dialog boxes appear warning you that the SDS drivers are unsigned, please click through these

warnings and continue with the installation. Usually, the device drivers that Quatech provides on the CDROM

accompanying the SDS are signed, but occasionally we must ship unsigned drivers. In this case, please be

assured that we are working to sign the drivers as soon as possible and make them available on our website.

Page 26