Performing Administrative Functions; Managing Users; Figure 61 - Show Users Screen - Quatech Device Server User Manual

Quatech SDS User's Manual

Performing administrative functions

Managing users

Note: You can create
maximum of ten users for each
SDS.
Showing users
Step Procedure
Preliminary Click on Admin in the selection bar and
Step then select Show Users from the left
panel.
Step Procedure
Step 1 Make note of any users you want to add
or delete. Select Add/Del Users to add or
remove users.
Adding users
Step Procedure
Preliminary Click on Admin in the selection bar and
Step then select Add/Del User from the left
panel.
October 2006
The Admin functions let you update the software, assign a descriptive
name to the SDS, and manage users (control who can access the SDS
from the Web interface). You can access these functions by selecting
Admin from the selection bar.
Initially, the SDS is configured to have no exclusive users. This
a
means that anyone with the device drivers installed and who knows
the SDS' IP address can use the Web interface to configure and
manage the SDS.
You can create users to restrict this type of access to approved
personnel only. Once you create a user, only someone using that user
ID and password has Web access to the SDS.

Figure 61 - Show Users screen

940-0183-154
Configuring the SDS using a Web interface
Description
The Show Users screen displays.
Passwords appear as asterisks.
Description
Write down the user's name exactly as it
appears including any spaces.
Description
The Add/Del Users screen displays.
Page 75