Step 3: Replace The Failed Hard Drive - M86 Security Web Filter HL User Manual

A S
PPENDICES ECTION
466
A E
PPENDIX

Step 3: Replace the failed hard drive

After verifying the failed hard drive in the Administrator
console, go to the server to replace the drive.
Press the red release button to release the handle on the
carrier, and then extend the handle fully and pull the carrier
out towards you. Replace the failed drive with your spare
replacement drive.
NOTE: Contact Technical Support if you have any questions
about replacing a failed hard drive.
M86 S U G
ECURITY SER UIDE