Apply Settings; Disable Radius - M86 Security Web Filter HL User Manual

G A
LOBAL DMINISTRATOR
174
S C 1: S
ECTION HAPTER
• Check the box for Use Web Filter IP as Source IP, if
the IP address of the Web Filter (LAN1 or LAN2)
should be used when forwarding packets instead of
the IP address of the NAS.
To disable the Forward Mode option, click the "Off" radio
button. This action causes the Use Web Filter IP as
Source IP field to display greyed out.
5. In the Reply Mode field, specify whether the server that
sent a request should receive a response.
To enable the Reply Mode option:
• Click the "On" radio button. A reply and accounting
response packet will be submitted to the sender (NAS
or Radius server).
• Enter an Authenticated Phrase to be shared by the
Radius server and NAS.
• At the Copy Proxy State field, click the "On" radio
button if you wish to copy the proxy state attribute to
the packet.
NOTE: The copy proxy state attribute will only be added to the
response packet if the Reply Mode is "On". If the Radius
accounting server is in the Forward Mode and the Reply Mode is
"Off", the copy proxy state attribute will be forwarded to the desti-
nation server but will not reply back to the client.

Apply Settings

Click Apply to save your settings.

Disable Radius

To disable the Radius feature:
1. At the Radius Mode field, click the "Off" radio button.
2. Click Apply.
YSTEM SCREEN
M86 S U G
ECURITY SER UIDE