Enable Radius; Specify Radius Authentication Settings - M86 Security Web Filter HL User Manual

Access Server or proxy server) that sends accounting
request packets to the external Radius accounting server.

Enable Radius

The Radius Mode is "Off" by default. To use Radius, click
the "On" radio button. This action displays the Radius
Authentication Settings frame.

Specify Radius Authentication Settings

1. In the Radius Server field, 1.2.3.9 displays by default.
2. In the Radius Port number field, 1813 displays by
3. In the Byte Order Mode field, specify the format in which
NOTE: The byte order should match the setting on the Radius
accounting server.
4. In the Forward Mode field, specify whether accounting
M86 S U G
ECURITY SER UIDE
G
LOBAL
Enter the IP address of the Radius accounting server.
default. Change this number only if the Radius
accounting server uses a different port number.
bytes will be transferred:
• Click the radio button corresponding to Network Byte
Order to transfer the most significant byte first.
• Click the radio button corresponding to Host Byte
Order to use the byte order stored in the server (big
endian or little endian order).
request packets will be delivered from the client (NAS or
proxy server) to the Radius accounting server.
To enable the Forward Mode option:
• Click the "On" radio button. The NAS will forward
accounting request packets to the Radius accounting
server.
A S
DMINISTRATOR ECTION
C 1: S
HAPTER YSTEM SCREEN
173