Disable Customer Feedback Module; Enable Customer Feedback Module - M86 Security Web Filter HL User Manual

WARNING: This feature is enabled by default. Please refer to the
sub-section Enable Customer Feedback Module to review the
contents of the disclaimer that applies when this feature is
enabled.
NOTE: For optimum results when using this feature, M86 recom-
mends enabling Alert Settings and entering at least one email
address that an M86 technical suppport representative can use to
contact you for assistance. (See Alert Settings window in Chapter
1: System screen for information about enabling this feature.)

Disable Customer Feedback Module

1. At the Customer Feedback Module - Auto Learning
2. Click Apply.

Enable Customer Feedback Module

1. At the Customer Feedback Module - Auto Learning
2. Click Apply to open the Disclaimer dialog box:
M86 S U G
ECURITY SER UIDE
G
LOBAL
Feature field, click "Off" to indicate that you wish to
disable the Customer Feedback Module.
Feature field, click "On" to indicate that you wish to
enable the Customer Feedback Module.
Fig. 2:3-15 Disclaimer box
A S
DMINISTRATOR ECTION
C 3: L
HAPTER IBRARY SCREEN
295