Group Types; Global Group - M86 Security Web Filter HL User Manual

I S
NTRODUCTORY ECTION

Group Types

18
C 1: F
HAPTER ILTERING
After the operational filtering mode is configured on the Web
Filter, the group type(s) that will be used on the Web Filter
must be set up so that filtering can take place.
In the Policy section of the Administrator console, group
types are structured in a tree format in the navigation panel.
The global administrator can access the Global Group and
IP groups in the tree. The group administrator can only
access the designated IP group to be maintained.
NOTES: If authentication is enabled, the global administrator can
also access the LDAP branch of the tree.
If multiple Web Filter units are set up on the network and the
synchronization feature is used, a Web Filter that is set up to
receive profile changes will only display the Global Group type in
the tree list. (See Chapter 3: Synchronizing Multiple Units for
more information on synchronization.)

Global Group

The first group that must be set up is the global group,
represented in the tree structure by the global icon
The filtering profile created for the global group represents
the default profile to be used by all groups that do not have
a filtering profile, and all users who do not belong to a group.
O
PERATIONS
.
M86 S U G
ECURITY SER UIDE