Add A Segment To The Network - M86 Security Web Filter HL User Manual

G A
LOBAL DMINISTRATOR
234
S C 2: P
ECTION HAPTER
NOTE: Segments of network traffic should not be defined if using
the firewall mode.
The main window (Fig. 2:2-2) lets you add segments to the
network, or modify or remove existing segments. The
Current Ranges list box includes a list of segments previ-
ously added using this feature. The Mandatory Settings tab
provides examples of settings that can be made.
NOTE: If this Web Filter is using the Source mode and the
Upstream Failover Detect feature is enabled, if a downstream
target server fails—as detected by the Appliance Watchdog—the
Current Ranges information from the failed downstream target
"node" displays in a Node tab following the Mandatory Settings
tab in this window:
Fig. 2:2-3 Range to Detect Settings window, Node tab

Add a Segment to the Network

To add a segment to be detected on the network:
1. Click Add to go to the next page:
OLICY SCREEN
M86 S U G
ECURITY SER UIDE