Status Window - M86 Security Web Filter HL User Manual

G A S C 1: S
LOBAL DMINISTRATOR ECTION HAPTER YSTEM SCREEN
6. Click Apply after all settings have been made.
NOTE: This test only verifies whether this server can contact the
source server. In order for synchronization to be operable on the
network, the source server must also be able to contact this
target server being configured.

Status window

The Status window displays when Status is selected from
the Synchronization menu. This menu selection is available
only if this server currently being configured is either set up
in the Source mode or Target mode.
If set up in the Source mode, this window is used for veri-
fying that profile updates are being sent to the target
server(s), as in the example below:
Fig. 2:1-49 Status window, Source mode
If set up in the Target mode, this window is used for verifying
that profile/library setting updates are being received from
the source server.
147
M86 S U G
ECURITY SER UIDE