Schedule A Backup; Configure Ftp Server Settings - M86 Security Web Filter HL User Manual

G A
LOBAL DMINISTRATOR
162
S C 1: S
ECTION HAPTER

Schedule a Backup

Configure FTP Server Settings

1. In the Server Configuration section of the Scheduled
Backup frame, enter the IP address of the Remote
Server.
2. In the FTP Directory field, enter the path where log files
will be stored.
3. In the Username field, type in the valid username for
FTP transfers.
NOTE: The passive mode is used for transferring backup files to
the server via FTP.
4. In the Password and Confirm Password fields, type in
the password for the username specified in the FTP
Directory field.
5. Click Apply to open the Server Configuration dialog box
asking if you wish to save your settings.
TIP: Click No to close the dialog box without saving your settings.
6. Click Yes to close the dialog box and to open a Message
alert box indicating that your settings have been saved.
7. Click OK to close the alert box.
You can now set up a schedule for a backup in the Recur-
rence Schedule section of the Scheduled Backup frame.
YSTEM SCREEN
M86 S U G
ECURITY SER UIDE