M86 Security Web Filter HL User Manual page 163

2. At the Selective Synchronization field, by default "All" is
3. By default, the "Upstream Failover Detect" checkbox is
NOTES: In order to use the failover detection feature, for each
target Web Filter, Appliance Watchdog software release 3.0.00
must first be installed on a separate workstation and set up to
watch that Web Filter. Go to http://www.m86security.com/
support/Watchdog/documentation.asp to download this
release.
If using the failover detection feature:
• Local Filtering on this source server must be enabled
• Troubleshooting on this source server must be disabled
• The Operation Mode on this source server and all target
servers must be set to use the same mode
• The mobile mode cannot be used
• If "Library" Selective Synchronization is enabled, end users for
the failed Web Filter "node" might be given the Global Group
Profile instead of their active filtering profiles
• If a target server fails, the Range to Detect Settings window
displays a Node tab with IP range information for the failed
"downstream" server.
4. In the IP to Send frame, select either the LAN 1 or LAN 2
M86 S U G
ECURITY SER UIDE
G
LOBAL
selected. This choice includes both profile and library
setting changes. Choose "Library" if only library category
additions/deletions (including search engine keywords
and URL keywords additions/deletions)—and not
profiles—should be synced to target servers.
unpopulated. Click this checkbox if this source server will
be set up to detect any failed Web Filter "node" and filter
that target server. Using this option, the source server will
function as the "upstream" Web Filter and all target
servers will function as "downstream" Web Filters.
IP address from the IP to Send pull-down menu. This IP
address will be used for sending profile/library setting
changes to the target server(s).
A S
DMINISTRATOR ECTION
C 1: S
HAPTER YSTEM SCREEN
143