Configure Quota Hit Settings - M86 Security Web Filter HL User Manual

G A
LOBAL DMINISTRATOR
224
S C 1: S
ECTION HAPTER

Configure Quota Hit Settings

1. Enter the number of Seconds Per Hit to indicate how
much time will be applied towards a "hit" (URL access) in
any category with a quota. The default is 10 seconds per
hit. The entry in this field combines with the minutes
entered in the quota from the filtering profile to determine
the amount of time the end user can access URLs in the
specified passed library group/category in that profile.
A quota can be set for an amount of time ranging from
one minute to 1439 minutes (one day minus one minute).
A hit can be set for an amount of time ranging from one
second to 3600 seconds (one hour).
As an example of how a quota works in conjunction with
hits, if a quota is set to 10 minutes and the number of
seconds per hit is set to 10 seconds, then the user will be
blocked from accessing URLs in the library group/cate-
gory when 60 hits are made to that category—i.e. 600
seconds (10 minutes) divided by 10 seconds.
NOTE: This field is greyed-out if the Web Filter is set up as a
target server in the synchronization mode.
2. If this Web Filter is set up with synchronization and is a
source server, enable Centralize Hits on Source only if
all hits should be made on this Web Filter.
NOTE: This field is greyed-out on a Web Filter set up as either a
standalone server or as target server in the synchronization
mode.
TIP: After making all configuration settings in this window during
this session, click Apply.
YSTEM SCREEN
M86 S U G
ECURITY SER UIDE