Range To Detect Advanced Settings - M86 Security Web Filter HL User Manual

Range to Detect Advanced Settings

Click the Advanced Settings button to display the Range to
Detect Advanced Settings window:
Fig. 2:2-11 Range to Detect Advanced Settings window
1. Enter the settings in the list box, using the correct syntax.
TIP: Use the Calculator to calculate IP ranges without any over-
laps. Enter the IP address, select the Netmask, and then click
Calculate to display results in the Min Host and Max Host fields.
Click Close to exit.
NOTE: Click Cancel to be given the option to return to the main
Range to Detect Settings window without saving your settings.
2. Click Apply to accept your entries and to return to the
M86 S U G
ECURITY SER UIDE
G
LOBAL
• click Finish to accept all your entries. This action takes
you to the main Range to Detect Settings window
where the segment you entered now displays in the
Current Ranges list box.
Refer to the examples above.
main Range to Detect Settings window.
A S
DMINISTRATOR ECTION
C 2: P
HAPTER OLICY SCREEN
241