Invisible Option: Specify The Block Page Delivery - M86 Security Web Filter HL User Manual

G A
LOBAL DMINISTRATOR
154
S C 1: S
ECTION HAPTER
If using the router or firewall mode, at the Device to send
block page pull-down menu, you may need to choose the
network card that will be used to send the block page to
client PCs.
NOTES: After making all selections in this window, click Apply.
The LAN IP address saved for the Device to send block page will
display in the IP field at the bottom of the Administrator console.

Invisible Option: Specify the Block Page Delivery

The Block Page Delivery Method frame displays if the Invis-
ible operation mode is selected. Specify the block page
delivery method by making the following selection(s):
Choose from either of the two Protocol Methods:
• "Send Block Page via ARP Table" - this option uses the
Address Resolution Protocol method to find the best
possible destination MAC address of a specified host,
usually the Web Filter gateway.
• "Send Block to Specified Host MAC Address" - using this
preferred method, the block page will always be sent to
the MAC address of a specified host, usually the Web
Filter gateway.
Using this option, choose from either of the two Block
Page Route To selections:
• "Default Gateway" - this option indicates that the
default gateway on your network will be used for
sending block pages. If the invisible mode is selected,
"Default Gateway" displays by default as the Block
Page Route To selection.
• "Alternate IP Address" - this option should be used if
block pages are not being served.
Enter the IP address of the router or device that will
serve block pages.
YSTEM SCREEN
M86 S U G
ECURITY SER UIDE