Range To Detect Advanced Settings - M86 Security IR Web Filter User Manual

G A
LOBAL DMINISTRATOR
238
S C 2: P
ECTION HAPTER
• click Finish to accept all your entries. This action takes
you to the main Range to Detect Settings window
where the segment you entered now displays in the
Current Ranges list box.

Range to Detect Advanced Settings

Click the Advanced Settings button to display the Range to
Detect Advanced Settings window:
Fig. 2:2-11 Range to Detect Advanced Settings window
1. Enter the settings in the list box, using the correct syntax.
Refer to the examples above.
TIP: Use the Calculator to calculate IP ranges without any over-
laps. Enter the IP address, select the Netmask, and then click
Calculate to display results in the Min Host and Max Host fields.
Click Close to exit.
NOTE: Click Cancel to be given the option to return to the main
Range to Detect Settings window without saving your settings.
2. Click Apply to accept your entries and to return to the
main Range to Detect Settings window.
OLICY SCREEN
M86 S U G
ECURITY SER UIDE