Operator Control- And Open-Loop Control Possibilities; Block Diagram - Siemens SIMOVERT MASTERDRIVES Operating Instructions Manual

Description
1.3

Operator control- and open-loop control possibilities

The unit can be controlled via
♦ the parameterization unit (PMU)
♦ an optional operator control panel (OP1)
♦ terminal strip
♦ a serial interface.
When networked with automation systems, the unit open-loop control is realized via optional interfaces and
technology boards.
1.4

Block diagram

C / L+
DC bus
connection
D / L −
PE1
Fig. 1.1 Block diagram
1-4
Terminal strip
Option boards-
in the elec-
CU
tronics box
DC fuses
Fusing and
DC link
Connector for OP1
P
U2/T1
V2/T2
W2/T3
PE2
Inverter with
CU and PMU
SIMOVERT MASTER DRIVES
09.97
Motor
connection
Siemens AG 6SE7087-6BD70
Operating Instructions