Siemens SIMOVERT MASTERDRIVES Operating Instructions Manual page 61

Certificates
Confirmation
This confirms that
Equipment
• Type
• Order No.:
is manufactured in conformance with DIN VDE 0558 Part 2and DIN VDE 0113 Part 6.2.
This equipment fulfills the shock hazard protection requirements according to DIN VDE 0106
Part 100 when the following safety rules are observed:
Service work in operation is only permissible at the electronics box
•
The converter must be switched into a no-voltage condition and isolated from the supply when
•
replacing any part/component
All panels must be closed during operation.
•
Thus, this equipment conforms to the appropriate regulations in Germany according to VBG 4 §2
(2) (VBG is a German regulatory body for safety-related issues).
The local operating regulations (e.g. DIN VDE 0105) must be observed when operating
the equipment.
ASI 1 PE D T
Dr. Link
12-2
Drive and Standard Products Group
Erlangen, 01.07.1995
AC drive converter
SIMOVERT
MASTER DRIVES
6SE70...
SIMOVERT MASTER DRIVES
09.97
ASI 1
System-Based
Drive Technology
Siemens AG 6SE7087-6BD70
Operating Instructions