Description; Applications - Siemens SIMOVERT MASTERDRIVES Operating Instructions Manual

09.97
1

Description

SIMOVERT MASTER DRIVES are power electronic units. They are available as
♦ Compact units
with three-phase- or DC current input
Output range:
♦ Chassis units
with three-phase- or DC current input
Output range:
♦ Cabinet units
with three-phase- or DC current input
Output range:
There are three versions depending on the particular application
♦ Frequency control
FC
♦ Vector control
VC
♦ Servo Control
SC
1.1

Applications

Drive converter with DC current input
DC drive converters generate a variable-frequency three-phase system at the motor side from a DC supply. This
variable-frequency three-phase system is used to continuously control the speed of three-phase motors.:
SIMOVERT MASTER DRIVES can be used with a common DC link, as well as for single-motor and multi-motor
drives.
Technological functions and expansions can be realized via defined interfaces in the open-loop control section.
Siemens AG 6SE7087-6BD70
SIMOVERT MASTER DRIVES
2.2 kW to 37 kW
45 kW to 200 kW
250 kW to 1500 kW
simple applications (e.g. pumps and fans)
High demands on dynamic performance and accuracy
Servodrives
Operating Instructions
Description
1-1