Paper Tab - Default; Printing Preferences - Media Tab; Media Tab - Settings - Microcom 485TC Operator's Manual

Direct thermal printer

Hide thumbs Also See for 485TC:

Table of Contents

Chapter 3

3.16.10.5

Paper tab - Default

This button will cause the driver to load in its default settings for the model driver installed.

Please note that this default may not represent your media type or size.

The Media tab is used to set specific setting of the media size and operations that in a form

that the printer requires to maintain correct registration.

3.16.11.1

The Settings control the Type of registration that the printer will use to align the media being

used and the Darkness of the image being printed.

3.16.11.1.1

Settings - Type

This field sets the registration method that the printer will use to register job to job. This

type should be set to the type of registration mark that is used to indicate the form size. The

Continuous setting instructs the printer to ignore registration marks and will move media

based on the form size settings. The Blackline setting cause the printer's reflective sensor

to look for a blackline mark and register based on the other Feed options. The Diecut and

485TC Operator's Manual - 880058-0100

Getting Started

3-25

Table of Contents

Table of Contents

Do you have a question about the 485TC and is the answer not in the manual?