Table of Contents
Advertisement
Chapter 6: Files, Folders, and Programs
Managing Folders
Files that have been created on a PC and then transferred to the netpad may also be
"read-only" files.
To check whether a file is a "read-only" file, highlight it in the System screen and
select Properties from the File menu.
Note: If you transfer a "read-only" file to another machine, it can be viewed,
and the "read-only" attribute can be removed.
6.9 Managing Folders
To move one or more folders or files from one location to another:
1. First highlight the file(s) or folder(s) to select them. Drag with the pen
to select more than one file.
To select all the files/folders in the current folder, use the Select all
command on the Edit menu. To deselect items, press the Esc key.
2. Select the Cut (move) command from the Edit menu. A dotted line
appears round the file/folder icon(s).
3. Go to the disk drive and open the folder into which the highlighted
items are to be moved.
4. Select the Paste command from the Edit menu.
Notes: Moving a folder also moves all the files within that folder.
If you move (or rename) your most recently opened Agenda or Data file,
you should open it again by selecting it from the System screen, rather than
tapping the Agenda or Data program icon. Tapping on the program icon
will create a new Agenda or Data file.
To copy a file or folder, or multiple files/folders to a different folder:
follow the earlier instructions, but select the Copy as opposed to the Cut (move)
command from the Edit menu.
74
Psion Teklogix netpad EPOC User Manual
Advertisement
Table of Contents
