Setting A System Passcode - Psion Teklogix netpad 1000 Series User Manual

Chapter 5: Configuring The netpad

Setting A System Passcode

5.1.2 Setting A System Passcode

To prevent anyone from looking at the files on the Internal disk of the netpad, set a
system passcode that you must type in before you can use the machine.
To set a system passcode:
1. Select the Passcode icon from the Control Panel in the System screen.
2. Check the Ask for passcode box so that your netpad requests the pass-
code when you switch the machine on.
3. Type the passcode twice for confirmation. Choose a passcode that you
won't easily forget, but one that won't be easy for someone else to
guess. DON'T FORGET your passcode! You will need to enter the
passcode again if you want to change the passcode settings on
your netpad.
The passcode is now set. The next time you switch your machine on, you will have
to type in the passcode to access your files.
52
Psion Teklogix netpad EPOC User Manual