Table of Contents
Advertisement
Chapter 3: Docking Station and MMC
Multimedia Cards
To insert the netpad into the docking station, align the two devices, and press down
on the netpad until the connection is made. To eject, press down on the release
button at the top of the docking station. The netpad will be pushed up and out of the
docking station.
You can rotate the orientation of the docking station on its stand. Hold the top of the
docking station in one hand and the bottom in the other. Lift the top part to release it
and rotate through 90°. When you let go of the top part, it will click into place.
3.1.2 Multimedia Cards
Multimedia cards (MMCs) are non-volatile memory cards, which fit into a dedi-
cated slot in the netpad and can be used to store application software and/or data.
The MMC slot is located on the right hand side of the netpad.
To insert an MMC:
•
Open the card slot door located on the side of the unit by sliding the retain-
ing latch. Push the MMC into place until it clicks. Close the door.
•
To remove an MMC, open the door and push the card. Store your MMC
safely, particularly if it contains valuable data.
40
Psion Teklogix netpad EPOC User Manual
Card Slot Door Latch
MMC Card
Reset
Button
Advertisement
Table of Contents
