Setting The Time, Date And Home City - Psion Teklogix netpad 1000 Series User Manual

If you want to switch the passcode off temporarily, remove the check from the Ask
for passcode box.
Note: The system passcode does not protect files stored on multimedia cards or
files copied to other machines.
Important: Don't forget your passcode! If you have forgotten the system pass-
code then you will have to reset the machine. All the files stored on
the internal disk will then be lost.

5.1.3 Setting The Time, Date And Home City

1. In the System screen, tap on Control Panel on the Toolbar, or select the
command from the Tools menu.
2. Tap the Time & date icon.
3. You see a dialogue in which you can set the time and date, your home
city and summer times around the world. Tap the Time & date button.
Move the highlight in the Time and Date lines by tapping on the part
you want to change, or by using the arrow keys. Type the date or time,
press P for p.m. or A for a.m.
4. Tap on the OK button and the time and date are saved.
5. Tap the Home button.
6. Select your Home city and country. To do this:
• Start typing in the name of your home city, or tap on the arrow symbols
or press the left and right arrow keys until you find the city you want.
• If your home city is not listed, select a city that is nearby for now
(adding a city is described in the Time document).
• Tap on the OK button and your home city is saved. Tap Close to remove
the dialogue and return to the Control Panel.
Note: The netpad can use a 12-hour clock (midnight is 12:00:00 a.m.) or a 24-
hour clock. Refer to the 'Time' document for details on how to change
these settings, and how to adjust the clock for summer time.
Chapter 5: Configuring The netpad

Setting The Time, Date And Home City

Psion Teklogix netpad EPOC User Manual
53