Table of Contents
Advertisement
Chapter 2: Getting Started
First Steps
2.8 First Steps
When you first switch on the netpad, you will see the System screen. This is the
"desktop" where you can view your files and folders, and change settings that
control how the netpad works.
•
All the information you enter into the netpad is contained in files; their
names are displayed in the System screen, beside icons that represent the
programs that created them.
•
All your files are stored in folders. When you start using the netpad, the
contents of the Documents folder is displayed.
•
The System screen's Title bar shows you which folder is currently dis-
played on the screen. When you start, you are in the Documents folder on
the C (Internal) drive.
You can have as many folders as you wish, and create folders within other folders.
Folders can contain files created in a variety of programs; they are not restricted to
files from a single program. See Chapter 6: "Files, Folders, and Programs" for
details of managing files and folders.
2.8.1 Aligning The Touch Screen
You can ensure that the touch screen is properly calibrated using the Screen menu.
1. In the System screen, tap on Control Panel on the Toolbar, or select the
command from the Tools menu.
2. Tap the Screen icon.
3. The Screen settings dialogue comes up. Tap the Calibrate button at
the side of the page, then follow the instructions on the screen. You will
be asked to tap the centre of each point indicated on the screen. At the
conclusion of the test, the calibration will be completed when you
accept the new settings by tapping on the Yes button.
28
Psion Teklogix netpad EPOC User Manual
Advertisement
Table of Contents
