Table of Contents
Advertisement
7.1 Introduction
This chapter explains how to use PsiWin to copy files between a PC and netpad, and
how to synchronize files such as Agenda, Data and Contact files. It assumes some
basic knowledge of Windows 95/98/NT4.
The chapter assumes that you have established a link between your PC and netpad.
•
Check this by looking in the PC's System tray in the bottom right-hand
corner of your desktop. There should be a wiggly line in the system tray if
you have successfully linked, as shown.
If this line is straight there is no connection.
•
Make sure that your link cable is connected.
•
On the netpad, go to the System screen and select Link to desktop... on the
Tools menu. Make sure that the Link line is set to Cable.
If you are having problems connecting to your netpad, please see "General Trouble-
shooting Tips" on page 167, or if docked check to make sure the RS-232 cable is
connected to the docking station.
For information about installing PsiWin, see the document, Installing and Setting
Up PsiWin. For information about printing to a PC printer via PsiWin, see "Using
PsiWin To Print Via A PC" on page 147.
7.2 About PsiWin 2
You can use the PC connectivity software, PsiWin 2, to integrate the netpad with
PCs running Windows 95/98/2000/ME or NT 4.0. By connecting the netpad to a PC
with a cable and running PsiWin on the PC, you can:
•
View your netpad files from Windows Explorer by using the 'My Psion'
icon which is added to the PC's Desktop. The 'My Psion' icon gives you
access to all of PsiWin's powerful file management facilities for your
netpad files.
Chapter 7: Connecting netpad To A PC
Psion Teklogix netpad EPOC User Manual
Introduction
81
Advertisement
Table of Contents
