4.3.1 When The Transfer Is Complete
When the transfer is complete the Infrared screens disappear. There is now a copy of
the selected information or file on the receiving machine.
Note: If a file is being transferred, and the folder on the receiving machine
already contains a file of that name, then the receiving machine displays a
dialogue where you can rename the received file, or move it to another
folder or disk drive.
The transfer does not affect the information on the sending machine.
4.3.2 Cancelling The Transfer
To stop the transfer while it is in progress, press Esc on either machine.
4.3.3 If The Transfer Fails
If the transfer fails, a message is displayed to indicate why. Follow the advice given
by the message and try again.
Chapter 4: Using Infrared
When The Transfer Is Complete
Psion Teklogix netpad EPOC User Manual
47