Table of Contents
Advertisement
Chapter 4: Using Infrared
Transferring The Information
4.3 Transferring The Information
1. Ask the user of the other netpad or Psion Teklogix device to open the
program or file where the information is to be transferred to.
• If the information to be transferred is an entire file, ask the other user to
• If the information is an Agenda or Data entry, ask the other user to open
• In all other cases, ask the other user to open the file or program to which
2. On the receiving machine, select the Infrared receive command from
the Tools menu. The Ready to receive screen is displayed.
3. Position the two machines, aligning the Infrared windows (ideally, both
should be resting on the same flat surface). The Infrared window on the
netpad is on the top of the machine (see "Features Of The netpad" on
page 17). The machines should be no more than one metre apart.
4. On the sending machine, select the Infrared send command from the
Tools menu. If the Infrared windows are in range, the transfer begins.
Infrared screens appear on both machines to indicate that the transfer is
taking place, and the progress of the transfer is displayed.
46
Psion Teklogix netpad EPOC User Manual
tap the System icon and move to the folder to which the file is to be
transferred.
the appropriate Agenda or Data file.
the selected information is to be transferred, and move the cursor to the
appropriate point in the file.
Advertisement
Table of Contents
