Preparing The Vehicle For Difficult Operating Conditions; Preparing The Vehicle For Rides On Dry Sand - Husqvarna FC 450 Rockstar Edition 2022 Owner's Manual

7.4

Preparing the vehicle for difficult operating conditions

Info
Use of the vehicle under difficult conditions, such as on sand or on wet and muddy surfaces, can result
in significantly increased wear of components, such as the drive train, brake system, or suspension
components. For this reason, it may be necessary to inspect or replace parts before the next scheduled
service.
–
Clean the air filter and air filter box.
Info
Check the air filter approx. every 30 minutes.
–
Check the electrical connector for humidity and corrosion and to ensure it is firmly seated.
» If humidity, corrosion, or damage is found:
–
Clean and dry the connector, or change it if necessary.
Difficult operating conditions are:
–
Rides on dry sand. (
–
Rides on wet sand. (
–
Rides on wet and muddy circuits. (
–
Rides at high temperatures or slow riding. (
–
Riding at low temperatures and in snow. (
7.5

Preparing the vehicle for rides on dry sand

( p. 67)
p. 23)
p. 24)
p. 24)
p. 25)
p. 25)
–
Mount the air filter dust cover.
Air filter dust cover (A46006920000)
Info
Observe the fitting instructions for Husqvarna Motor-
cycles accessories.
F03669-01
–
Mount the air filter sand cover.
Air filter sand cover (A46006922000)
Info
Observe the fitting instructions for Husqvarna Motor-
cycles accessories.
F03670-01
PREPARING FOR USE 7
23