Quick Attach Assembly; Connecting With A Mechanical Jlg Quick Attach; Connecting With A Hydraulic Jlg Quick Attach - JLG G5-18A Service Manual

3.5

QUICK ATTACH ASSEMBLY

This machine is equipped with a JLG Quick Attach
system for easy attachment changes. An optional
Universal Quick Attach system is also availiable.
3.5.1 Connecting with a Mechanical JLG
Quick Attach
1. Retract quick attach device to provide clearance.
Check to be sure the retainer pin (1) is out.
2. Align attachment pin (2) with recess in
attachment (3). Raise boom slightly to engage
attachment pin in recess.
3. Engage quick attach device.
4. Shut off engine. Exit cab and insert lock pin and
secure with retainer pin.
5. If attachment is equipped, connect auxiliary
hydraulic hoses to the corresponding auxiliary
hydraulic fittings on the side of the boom head. See
Section 3.5.4, "Connecting a Hydraulic Operated
Attachment."
3.5.2 Connecting with a Hydraulic JLG
Quick Attach
1. Retract quick attach device to provide clearance.
Check to be sure lock pin (4) is disengaged.
G5-18A, 2505
3
2
1
MY2620
3
2
4
MY2620
2. Align attachment pin (2) with recess in
attachment (3). Raise boom slightly to engage
attachment pin in recess.
3. Engage quick attach device.
4. Press and hold button (5) and button (6), at the
same time move the joystick right to engage or left to
disengage the quick attach device.
5
MY2610
5. Raise the boom to eye level and visually check that
the quick attach pin protrudes through the hole. If the
pin does not protrude through the hole, place the
attachment on the ground and return to step 2.
ENGAGED
6. If attachment is equipped, connect auxiliary
hydraulic hoses to the corresponding auxiliary
hydraulic fittings on the side of the boom head. See
Section 3.5.4, "Connecting a Hydraulic Operated
Attachment."
Boom
6
MY2600
DISENGAGED
3-13