Switch Tests; Connection Of The Switches Described In This Manual - Malaguti XTM POWER UP 2007 Troubleshooting Manual

B
- TROUBLESHOOTING
ELECTRIC SYSTEM TROUBLESHOOTING
B
Checking the Switches
CHAPTER
CHECKING SWITCHES
Use a Tester to check continuity between terminals
and make sure these are correctly connected. If one of
the combinations does not give the requested result,
replace the component.
NOTE:
Operate the "ON-OFF" switch several times.
Put Tester selector on "W".
Put indicator on "0".
CONNECTION OF THE SWITCHES
DESCRIBED IN THIS MANUAL
This manual contains connection diagrams, like the one
illustrated on the left, which illustrate how switch
terminals should be connected (key switch, brake
switch, light switch, etc.).
The column on the left indicates the different positions
of the switches; the first line indicates the colours of
the wires connected to the switch terminals.
"•" means that there is continuity between the terminals;
namely a closed circuit in a certain position of the switch.
In this example, there is continuity between "Br" and
"R" when the switch is "ON".
12 08.06
PAGE ISSUE
SECTION 2
SECTION 2