Malaguti XTM POWER UP 2007 Troubleshooting Manual page 48

The "secondary menu" includes all the functions that are displayed by the bar graph. You can choose which
information to display by pressing the MODE button and following the instructions given in the paragraph
describing the function of the button itself. The bar graph is divided into 2 sections: the first section (bottom
part) is composed of 8 segments and is located on the left side of the display. Segments are vertical. The
second section (top part) is composed of 10 segments and is located at the top of the display. Segments are
horizontal. Reference headings and icons appear when the function is displayed
1. RPM indicator function
This information is displayed by the entire bar graph
(18 segments) and is accompanied by the heading
RPM appearing on the top right of the top section
of the bar.
Information is updated every 0.33 sec. and is
controlled in accordance to the following table:
rpmx100 Active
[RPM] seg.
0
0
up to 14 1
from 15 to 17 2
from 18 to 20
3
from 21 to 23 4
from 24 to 29 5
from 30 to 35
6
When a speed of 9700 RPM is reached, the
instrument will display
OVERBOOST above the top section of the bar
graph, on the right.
08.06
ISSUE
B
- TROUBLESHOOTING
ELECTRIC SYSTEM TROUBLESHOOTING
Signal System
SECONDARY MENU FUNCTIONS (SUBMENU)
rpmx100
[RPM]
from 36 to 41
from 42 to 47
from 48 to 53
from 54 to 61
from 62 to 67
from 68 to 73
from 74 to 79
the message
rpmx100
Active
seg. [RPM]
from 80 to 85
7
from 86 to 91
8
from 92 to 93
9
from 94 to 95
10
from 96 to 97
11
12
over 97
13
RPM - OVERBOOST function
SECTION 2
B
CHAPTER
Active
seg.
14
15
16
17
18
18+over
boost
49
PAGE
SECTION 2