Malaguti XTM POWER UP 2007 Troubleshooting Manual page 26

HIGH BEAM LIGHT AND INDICATOR LIGHT ARE NOT WORKING
1. Check left switch
Connect Tester ( ) to switch as follows:
- Tester (+) terminal
- Tester (-) terminal
- Turn light switch to "HI" symbol.
HIGH BEAM INDICATOR LIGHT DOES NOT COME ON
1. Light bulb and relative coupling
- Check continuity of light bulb and its coupling
- Check continuity of blue cable leading from left
hand switch to lamp socket of instrument board
indicator light
There is no lamp socket grounding point. Repair by
providing a jumper between black cable connected
to lamp socket and a grounded point of the chassis.
08.06
ISSUE
B
- TROUBLESHOOTING
ELECTRIC SYSTEM TROUBLESHOOTING
(SWITZERLAND VERSION ONLY)
blue cable
pink cable
(SWITZERLAND VERSION ONLY)
CONTINUITY
CONTINUITY
Lighting System
NO CONTINUITY
Replace left hand switch
NO CONTINUITY
Replace lamp or coupling
NO CONTINUITY
Blue cable is interrupted
Repair, see "Circuit Diagram"
SECTION 2
B
CHAPTER
27
PAGE
SECTION 2