Malaguti XTM POWER UP 2007 Troubleshooting Manual page 42

2. Continuity of grey cable
- Connect Tester " " and check continuity of grey
cable between fuel probe connector and
instrument board connector (PIN 6)
3. Check grounding (black cable)
- Connect Tester " ", as follows:
Terminal (+) Black cable
Terminal (-) Chassis grounding
- Check continuity of grounding of probe
connector (black cable on system side)
Replace instrument board
08.06
ISSUE
B
- TROUBLESHOOTING
ELECTRIC SYSTEM TROUBLESHOOTING
CONTINUITY
CONTINUITY
Signal System
NO CONTINUITY
Grey cable interrupted. Resume
connection.
See "Circuit Diagram".
NO CONTINUITY
Black cable interrupted. Resume
connection.
See "Circuit Diagram".
SECTION 2
B
CHAPTER
43
PAGE
SECTION 2