Malaguti XTM POWER UP 2007 Troubleshooting Manual page 53

B
CHAPTER
When vehicle is turned on (key turned from OFF to ON), the system provides the user some information that,
for sake of simplicity, is shown on two pages;
- first page: displays the version and date of release of the software. This information is displayed only
during the instrument installation operations.
- Second page: displays the selected model (Enduro or Motard).
- Third page: LCD check; for 3 seconds. All segments of the LCD are activated.
As the three pages described above appear, the system also checks the indicator lights and backlighting; in
other words, all LED are activated and then go off at the end of the check. After the above operations, the
system is ready for normal operation.
Every time the key switch is turned off, the following operations are performed:
- the display and its backlighting are turned off
- all indicator lights go off
- system switches to 'sleep' mode, characterised by a low energy consumption, and all activities are stopped;
only the time function remains active.
54
PAGE
SECTION 2
B
- TROUBLESHOOTING
ELECTRIC SYSTEM TROUBLESHOOTING
Signal System
START-UP (SYSTEM STARTING)
SLEEP-MODE
SECTION 2
08.06
ISSUE