Installation Procedure - Integra DRX-7.1 Basic Manual

> Before Start > Part Names

Installation procedure

Install
1
2
> Install > Initial Setup
3
> Playback > Advanced Manual
Troubleshooting | Supplementary Information, etc.
This unit can be used in a number of ways, depending on
the layout of the speakers you are installing, and the
connections made to external devices. Read the following
to help make the installation process smoother.
Step1: Speaker Layout
Select the speaker layout that suits the types of speakers
you have and the conditions they will be used in from the
choices presented on pages P8 to P12, then install the
speakers by referring to the illustrations and explanations
on the relevant page. Speaker layouts include systems that
use surround back speakers, systems that use height
speakers, and systems that use Bi-Amping speakers. Also
refer to the combinations available in "Speaker
combinations" on P13.
Step2: Connect the Speakers
To connect the speaker systems to this unit, refer to P14 if
you are using a speaker layout described on one of P8 to
P11, and to P15 to use a speaker layout using Bi-Amping
speakers described on P12. The connection process will be
smoother if you refer to the illustrations and explanations
and prepare the required cables before hand.
Step3: Connect the TV & AV Components
Refer to P16 to P24 to connect your external devices such
as your TV, Blu-ray Disc Player, and also supplied
accessories such as the antennas. Also, P21 to P23
introduces the Multi-zone Connection option that allows you
to play video or audio into rooms other than the main room.
The connection process will be smoother if you refer to the
illustrations and explanations, confirm the connection types
on the external devices, and prepare the required cables
before hand.
7
En